Skip to main content

Column chart

Two to twenty-four values as columns growing one after another on a scale from nought, negative ones hanging below it, the marked ones lit with their values: 8 to 12 seconds. In ten styles, each wearing your brand's colours, fonts, logo, presenter and background.

Template idtpl_8b1838ca90ff
MarketsEvery market
VariantsCorporate glass, Bento grid, Broadcast news, Editorial, Swiss grid, Neo-brutalist, Soft friendly, Data terminal, Sketch notes, Clear civic
Ready-made feeds72, listed below

Use cases​

  • Values side by side as columns: results per month, per region, per product.
  • Gains and losses on one scale from nought, the ones that matter lit up.
  • Up to twenty-four columns for a full year of months or a long comparison.

Variants​

A variant is this template drawn another way, and it comes in versions: immutable builds, the newest first. A channel follows the newest version of its variant, unless it is pinned to one.

VariantWhat it isVersionsNewest
Corporate glassFrosted glass cards over an aurora in your brand colours: calm and premium.11.0.0
Bento gridRounded tiles in your brand colours, each moving on its own: a modern product look.11.0.0
Broadcast newsA news channel in your colours: channel bug, lower third, ticker and your presenter.11.0.0
EditorialA magazine page in your paper tone and serif: masthead, hairline rules and a byline.11.0.0
Swiss gridA strict grid, large type and your brand colour as the one accent. Nothing bounces.11.0.0
Neo-brutalistLoud flat blocks in your colours with thick borders and hard shadows.11.0.0
Soft friendlySoft shapes and rounded cards in tints of your brand colour: warm and approachable.11.0.0
Data terminalA market terminal whose ink is your brand colour, the figures scrambling into place.11.0.0
Sketch notesA notebook page that writes and doodles itself in your brand ink.11.0.0
Clear civicBuilt for reading: high contrast, large plain type and numbered steps.11.0.0

What it accepts​

Every variant takes the same content, so one document draws in any of them.

Two to twenty-four values side by side as columns, growing one after another on a scale from nought, the marked ones at full strength with their values written on them. metaData is the post's title, descriptions and hashtags and is never drawn.

FieldTypeRequiredLimitWhat it is
clipDatagroupyesClip data: Everything drawn: a kicker, what the columns show, the prefix and unit of the values, the columns, a note, the source and the look.
clipData.kickertextup to 20 charactersKicker: A word above the title, such as TOMORROW or BY HOUR.
clipData.titletextyesup to 80 charactersTitle: What the columns show and when.
clipData.prefixtextup to 3 charactersPrefix: Written before the marked values, such as a currency sign.
clipData.unittextup to 12 charactersUnit: What the scale counts in, written over it: EUR/MWh, %, cars.
clipData.itemslistyesat least 2, up to 24Columns: In the order they are drawn, left to right: hours, months, years or categories. Two to twenty-four. Negative values hang below the zero line.
clipData.items[]groupColumn
clipData.items[].labeltextyesup to 8 charactersLabel: Short: an hour, a month, a year. Crowded labels are thinned out, marked ones always stay.
clipData.items[].valuenumberyes4 decimalsValue
clipData.items[].highlightbooleanMark this column: Lit in the accent colour with its value written on it.
clipData.notetextup to 120 charactersContext: One or two lines about the marked columns.
clipData.sourcetextup to 70 charactersSource: Where the content comes from, shown small at the foot. Drawn exactly as written: write its label too, such as Source: at the start, as the template adds no word of its own.
clipData.styleWordsgroupStyle words: The few words some styles write into their own frame, each drawn exactly as written, in the language you write it in. A word left out is not drawn: no template adds a word of its own. The same keys in every format of the collections; each style draws only its own.
clipData.styleWords.livetextup to 16 charactersLive marker (Broadcast news): Written beside the light in Broadcast news' channel bug, such as LIVE. Left out, the light stands alone.
clipData.styleWords.bylinetextup to 12 charactersByline (Editorial): Written before the presenter's name in Editorial, such as By. Left out, the name stands alone.
clipData.styleWords.functionKeyslistup to 4Function keys (Data terminal): Data terminal's row of keys F1 to F4, one word each, in order, such as HELP, DATA, CHART and NEWS; the second is drawn held down, and a key that does not fit the row is left out. Left out, no keys are drawn.
clipData.styleWords.functionKeys[]textup to 12 charactersKey
clipData.styleWords.commandKeytextup to 10 charactersCommand key (Data terminal): The key at the end of Data terminal's row, in the rise colour, such as GO. Left out, none is drawn.
clipData.styleWords.realTimetextup to 12 charactersReal-time light (Data terminal): Written beside the blinking light in Data terminal's status bar, such as RT. Left out, the light stands alone.
clipData.styleWords.messageLabeltextup to 12 charactersMessage window label (Data terminal): The tab on Data terminal's message window round the presenter, such as MSG. Left out, the window has no tab.
clipData.styleWords.pictureLabeltextup to 12 charactersPicture panel label (Data terminal): Written in the strip along the top of Data terminal's picture panels, such as IMG. Left out, the strip stays empty.
clipData.lookgroupLook: How the clip looks and moves within its style. The same switches in every format of the collections. Leave a switch out, or set it to the style's own, and the style decides.
clipData.look.themeenumauto, brand, light, dark, boldTheme: The style's own choice, or your brand's Theme where it sets one; your brand's own colours and background; a light or dark page tinted with your brand colour; or your brand colour as the page.
clipData.look.paceenumauto, calm, standard, punchyPace: How things arrive: the style's own rhythm, calm fades, a standard rhythm, or punchy slams and cuts.
clipData.look.cornersenumauto, square, soft, roundCorners: The shape of cards, panels and marks.
clipData.look.alignenumauto, start, centreText alignment: Where the text lines up.
clipData.look.logoenumauto, free, light, dark, brandLogo: The style's own: the logo on the style's plate, or where it would not read there, on a light or a dark plate, or your logo for dark surfaces where your brand has one. As it is: no plate, frame or crop; make sure it reads on the theme you choose. On a light, dark or brand colour plate: that plate in every style, also where the style draws none.
clipData.look.logoSizeenumauto, small, largeLogo size: Standard is the style's own size. Small draws the logo a fifth smaller, with its plate. Large draws it a quarter larger wherever the style has room for it, and at the standard size where it has none.
clipData.look.logoFormenumauto, mark, fullLogo form: The style's own: your brand's mark (its symbol alone, set in your brand's settings) where the style's logo space is round or a badge, or where a wide logo would have to be made much smaller to fit; the full logo everywhere else. Mark: always the mark. Full logo: never the mark. A brand without a mark always shows its full logo.
clipData.look.hideHeaderbooleanHide logo and title: Leaves out the line at the top of the clip: your logo, the title line and the style's decoration around them, so the content starts at the top. To leave it out of every clip, switch Logo and title line off in your brand's settings.
clipData.look.hideFooterbooleanHide footer line: Leaves out your footer line at the foot of the clip, with whatever the style draws only to carry it, so the content reaches further down. Your presenter and the source line stay. To leave it out of every clip, switch Footer line off in your brand's settings.
clipData.look.patternenumauto, none, dots, grid, linesBackground pattern: The fine texture behind the content. The style's own keeps what the style draws there, and some styles draw none. None leaves the background plain. Dots, Grid and Diagonal lines draw that pattern faintly instead, the same in every style, in the colour of your page.
clipData.look.backgroundbooleanBrand background: Draws your brand's background picture or film behind the content under any theme, under a veil of the theme's page so the words stay readable. Under Brand colours it is always drawn. It needs a background switched on in your brand's settings; without one, the theme's plain page is drawn.
metaDatagroupMeta data: Everything about the post that is never drawn in the clip: its title, its description in four lengths, one per kind of platform, and its hashtags. Reelwire adds the brand's description, link and hashtags after it. Left out, the post text is generated from the clip data.
metaData.titletextup to 100 charactersTitle: Used where the platform has a title of its own: Facebook Reels, Pinterest and YouTube. Up to 100 characters, which every one of them takes.
metaData.captionTinytextup to 200 charactersTiny description (Pinterest, Threads, X): Up to 200 characters. The brand's description, link and hashtags follow it within the platform's limit.
metaData.captionShorttextup to 500 charactersShort description (Telegram): Up to 500 characters. The brand's description, link and hashtags follow it within the platform's limit.
metaData.captionMediumtextup to 1500 charactersMedium description (Discord, Facebook Reels, Instagram, LinkedIn, Slack, TikTok): Up to 1500 characters. The brand's description, link and hashtags follow it within the platform's limit.
metaData.captionLongtextup to 4000 charactersLong description (Facebook Feed, YouTube): Up to 4000 characters. The brand's description, link and hashtags follow it within the platform's limit.
metaData.hashtagslistup to 15Hashtags: Written without the #. Up to 15, which every platform takes.
metaData.hashtags[]textup to 60 charactersHashtag

locales carries other languages: under each language code, the parts of clipData and metaData that differ, laid over the default, so a language with no copy still renders.

A picture is always a file from your media library: media:// followed by its id or its name. Anything the table does not list is refused, and so is anything over its limit, with a 400 schema_validation error that names the field.

Ask Reelwire for the whole JSON Schema, the document your content is checked against, without signing in:

curl "https://app.reelwire.io/v1/formats/template/tpl_8b1838ca90ff?variant=Corporate%20glass&version=1.0.0"

Delivery JSON​

Your own system sends this to one of your streams, POST /v1/stream, and every channel listening to that stream draws it with its template. data is the document described above; a stream with an empty field map passes it to the template unchanged. Try it first on POST /v1/stream/validate, which answers the same without publishing anything. Streams and feeds explains the rest, including how to map a document of your own shape instead.

{
"streamId": "st_your_stream_id",
"eventId": "01M2SQMKK3G1NVFXV31DCBVB95",
"occurredAt": "2026-09-23T07:00:00Z",
"locale": "en",
"data": {
"clipData": {
"kicker": "Tomorrow",
"title": "Power is cheapest at midday tomorrow, when prices fall below zero",
"prefix": "",
"unit": "EUR per MWh",
"items": [
{
"label": "00",
"value": 92.4
},
{
"label": "01",
"value": 85.1
},
{
"label": "02",
"value": 80.6
},
{
"label": "03",
"value": 78.2
},
{
"label": "04",
"value": 79.9
},
{
"label": "05",
"value": 88.3
},
{
"label": "06",
"value": 104.7
},
{
"label": "07",
"value": 121.5
},
{
"label": "08",
"value": 112.3
},
{
"label": "09",
"value": 84.6
},
{
"label": "10",
"value": 41.2
},
{
"label": "11",
"value": 12.8
},
{
"label": "12",
"value": -4.6,
"highlight": true
},
{
"label": "13",
"value": -8.9,
"highlight": true
},
{
"label": "14",
"value": -2.1,
"highlight": true
},
{
"label": "15",
"value": 18.4
},
{
"label": "16",
"value": 56.7
},
{
"label": "17",
"value": 98.2
},
{
"label": "18",
"value": 138.6
},
{
"label": "19",
"value": 152.3
},
{
"label": "20",
"value": 141
},
{
"label": "21",
"value": 118.4
},
{
"label": "22",
"value": 104.9
},
{
"label": "23",
"value": 96.5
}
],
"note": "From 12:00 to 15:00 solar output is expected to exceed demand, and the price drops below zero",
"source": "Source: Northwind Power Exchange, day-ahead prices for 2 October",
"styleWords": {
"live": "LIVE",
"byline": "By",
"functionKeys": [
"HELP",
"DATA",
"CHART",
"NEWS"
],
"commandKey": "GO",
"realTime": "RT",
"messageLabel": "MSG",
"pictureLabel": "IMG"
},
"look": {
"theme": "auto",
"pace": "auto",
"corners": "auto",
"align": "auto",
"logo": "auto",
"logoSize": "auto",
"logoForm": "auto",
"hideHeader": false,
"hideFooter": false,
"pattern": "auto",
"background": false
}
},
"metaData": {
"title": "Power prices fall below zero at midday tomorrow",
"captionTiny": "Tomorrow's power price drops below zero from 12:00 to 15:00, when solar output is expected to exceed demand. The peak is 152.3 at 19:00.",
"captionShort": "Tomorrow's day-ahead power price drops below zero from 12:00 to 15:00, reaching -8.9 EUR per MWh at 13:00, as solar output is expected to exceed demand. The evening peak is 152.3 EUR per MWh at 19:00. Shifting washing, charging and heating into the midday hours saves the most.",
"captionMedium": "Tomorrow's day-ahead power price on the Northwind Power Exchange drops below zero from 12:00 to 15:00, reaching -8.9 EUR per MWh at 13:00, as solar output is expected to exceed demand. Prices climb again from 16:00 and peak at 152.3 EUR per MWh at 19:00, when people come home and the sun has set. Households and businesses on hourly tariffs save the most by shifting washing, charging and heating into the midday hours.",
"captionLong": "Tomorrow's day-ahead power price on the Northwind Power Exchange drops below zero from 12:00 to 15:00, reaching -8.9 EUR per MWh at 13:00, as solar output is expected to exceed demand on a clear, mild day. Prices climb again from 16:00 and peak at 152.3 EUR per MWh at 19:00, when people come home and the sun has set. The night hours stay around 80 EUR per MWh. Households and businesses on hourly tariffs save the most by shifting washing, charging and heating into the midday hours. Prices are day-ahead prices as published by the exchange and are illustrative.",
"hashtags": [
"energy",
"electricity",
"solar"
]
}
}
}

The delivery names no version: which build draws it is the channel's choice, the newest of its variant or the one it is pinned to. eventId is a ULID you make once per event: sending the same one again changes nothing. occurredAt is when the thing happened, not when you sent it. locale is the language of the text in data, and data.locales carries other languages beside it.

Ready-made feeds drawn with it​

Each of these feeds is drawn with this template, in whichever of its variants a channel chooses when it adds the feed.