Skip to main content

Head to head

Two or three contenders side by side, each with its picture and name and a VS between them, compared on up to six figures that count up together, the better side ticked on every row: 8 to 11 seconds. In eleven styles, each wearing your brand's colours, fonts, logo, presenter and background.

Template idtpl_dfa25e30e29c
MarketsEvery market
VariantsCorporate glass, Bento grid, Broadcast news, Editorial, Swiss grid, Neo-brutalist, Soft friendly, Clear civic, Sports broadcast, Data terminal, Sketch notes
Ready-made feeds6, listed below

Use cases​

  • Two offers, tariffs, products or plans compared figure by figure, the better one ticked on each row.
  • A match, a vote or a result: two or three sides with their pictures and the figures that decide it.
  • Up to six figures per side, each with its unit and whether higher or lower is better.

Variants​

A variant is this template drawn another way, and it comes in versions: immutable builds, the newest first. A channel follows the newest version of its variant, unless it is pinned to one.

VariantWhat it isVersionsNewest
Corporate glassFrosted glass cards over an aurora in your brand colours: calm and premium.11.0.0
Bento gridRounded tiles in your brand colours, each moving on its own: a modern product look.11.0.0
Broadcast newsA news channel in your colours: channel bug, lower third, ticker and your presenter.11.0.0
EditorialA magazine page in your paper tone and serif: masthead, hairline rules and a byline.11.0.0
Swiss gridA strict grid, large type and your brand colour as the one accent. Nothing bounces.11.0.0
Neo-brutalistLoud flat blocks in your colours with thick borders and hard shadows.11.0.0
Soft friendlySoft shapes and rounded cards in tints of your brand colour: warm and approachable.11.0.0
Clear civicBuilt for reading: high contrast, large plain type and numbered steps.11.0.0
Sports broadcastA sports channel in your colours: slanted bars, a bug with your mark and a condensed face.11.0.0
Data terminalA market terminal whose ink is your brand colour, the figures scrambling into place.11.0.0
Sketch notesA notebook page that writes and doodles itself in your brand ink.11.0.0

What it accepts​

Every variant takes the same content, so one document draws in any of them.

Two or three contenders in columns, a VS between their heads, compared on up to six attributes row by row, each row's figures counting up together with their bars and the better side marked. metaData is the post's title, descriptions and hashtags and is never drawn.

FieldTypeRequiredLimitWhat it is
clipDatagroupyesClip data: Everything drawn: a kicker, the title, two or three contenders with an optional picture each, how the pictures are fitted, up to six attributes compared row by row with the better side marked, the source and the look.
clipData.kickertextup to 20 charactersKicker: A word above the title, such as COMPARED or HEAD TO HEAD.
clipData.titletextyesup to 80 charactersTitle: What is being compared. Shown from the first frame, above the contenders.
clipData.itemslistyesat least 2, up to 3Contenders: Two or three, one column each, in this order, a VS between them.
clipData.items[]groupContender
clipData.items[].nametextyesup to 24 charactersName
clipData.items[].picturevideomedia:// picture or video from the media library, alt text up to 120 charactersPicture or video: Shown above the name: a product shot, a photograph or a logo. A video from the media library plays in its place, without its sound, and from its start again whenever it ends.
clipData.pictureFitenumauto, fill, wholePicture fit: Automatic, the default, fills the frame when a picture is close to its shape and shows it whole when filling would cut off more than a sixth of it, so no picture is cropped away. Fill the frame always crops to the frame, right for photographs; Show it whole never crops, right for logos and cut-out products.
clipData.pictureFocusenumcentre, top, bottom, left, rightPicture focus: Which part of a picture stays in view when it fills its frame and its edges are cropped: the middle, or one side.
clipData.rowslistyesat least 1, up to 6Attributes: One to six rows, each one figure per contender in the same order, with which way is better. Each row adds a second.
clipData.rows[]groupAttribute
clipData.rows[].labeltextyesup to 28 charactersWhat it is
clipData.rows[].valueslistyesat least 2, up to 3Figures: One per contender, in the order of the contenders.
clipData.rows[].values[]number4 decimalsFigure
clipData.rows[].prefixtextup to 3 charactersPrefix: Written before each figure, such as a currency sign.
clipData.rows[].unittextup to 8 charactersUnit: Written after each figure where the figures are large enough, else once after the row's label.
clipData.rows[].betterenumhigh, low, noneBetter is: Which way wins the row, marked with a tick. A tie marks nobody.
clipData.versustextup to 8 charactersBetween the contenders: The word in the block between each two contenders' heads, such as VS. Left out, no block is drawn.
clipData.sourcetextup to 70 charactersSource: Where the content comes from, shown small at the foot. Drawn exactly as written: write its label too, such as Source: at the start, as the template adds no word of its own.
clipData.styleWordsgroupStyle words: The few words some styles write into their own frame, each drawn exactly as written, in the language you write it in. A word left out is not drawn: no template adds a word of its own. The same keys in every format of the collections; each style draws only its own.
clipData.styleWords.livetextup to 16 charactersLive marker (Broadcast news): Written beside the light in Broadcast news' channel bug, such as LIVE. Left out, the light stands alone.
clipData.styleWords.bylinetextup to 12 charactersByline (Editorial): Written before the presenter's name in Editorial, such as By. Left out, the name stands alone.
clipData.styleWords.functionKeyslistup to 4Function keys (Data terminal): Data terminal's row of keys F1 to F4, one word each, in order, such as HELP, DATA, CHART and NEWS; the second is drawn held down, and a key that does not fit the row is left out. Left out, no keys are drawn.
clipData.styleWords.functionKeys[]textup to 12 charactersKey
clipData.styleWords.commandKeytextup to 10 charactersCommand key (Data terminal): The key at the end of Data terminal's row, in the rise colour, such as GO. Left out, none is drawn.
clipData.styleWords.realTimetextup to 12 charactersReal-time light (Data terminal): Written beside the blinking light in Data terminal's status bar, such as RT. Left out, the light stands alone.
clipData.styleWords.messageLabeltextup to 12 charactersMessage window label (Data terminal): The tab on Data terminal's message window round the presenter, such as MSG. Left out, the window has no tab.
clipData.styleWords.pictureLabeltextup to 12 charactersPicture panel label (Data terminal): Written in the strip along the top of Data terminal's picture panels, such as IMG. Left out, the strip stays empty.
clipData.lookgroupLook: How the clip looks and moves within its style. The same switches in every format of the collections. Leave a switch out, or set it to the style's own, and the style decides.
clipData.look.themeenumauto, brand, light, dark, boldTheme: The style's own choice, or your brand's Theme where it sets one; your brand's own colours and background; a light or dark page tinted with your brand colour; or your brand colour as the page.
clipData.look.paceenumauto, calm, standard, punchyPace: How things arrive: the style's own rhythm, calm fades, a standard rhythm, or punchy slams and cuts.
clipData.look.cornersenumauto, square, soft, roundCorners: The shape of cards, panels and marks.
clipData.look.alignenumauto, start, centreText alignment: Where the text lines up.
clipData.look.logoenumauto, free, light, dark, brandLogo: The style's own: the logo on the style's plate, or where it would not read there, on a light or a dark plate, or your logo for dark surfaces where your brand has one. As it is: no plate, frame or crop; make sure it reads on the theme you choose. On a light, dark or brand colour plate: that plate in every style, also where the style draws none.
clipData.look.logoSizeenumauto, small, largeLogo size: Standard is the style's own size. Small draws the logo a fifth smaller, with its plate. Large draws it a quarter larger wherever the style has room for it, and at the standard size where it has none.
clipData.look.logoFormenumauto, mark, fullLogo form: The style's own: your brand's mark (its symbol alone, set in your brand's settings) where the style's logo space is round or a badge, or where a wide logo would have to be made much smaller to fit; the full logo everywhere else. Mark: always the mark. Full logo: never the mark. A brand without a mark always shows its full logo.
clipData.look.hideHeaderbooleanHide logo and title: Leaves out the line at the top of the clip: your logo, the title line and the style's decoration around them, so the content starts at the top. To leave it out of every clip, switch Logo and title line off in your brand's settings.
clipData.look.hideFooterbooleanHide footer line: Leaves out your footer line at the foot of the clip, with whatever the style draws only to carry it, so the content reaches further down. Your presenter and the source line stay. To leave it out of every clip, switch Footer line off in your brand's settings.
clipData.look.patternenumauto, none, dots, grid, linesBackground pattern: The fine texture behind the content. The style's own keeps what the style draws there, and some styles draw none. None leaves the background plain. Dots, Grid and Diagonal lines draw that pattern faintly instead, the same in every style, in the colour of your page.
clipData.look.backgroundbooleanBrand background: Draws your brand's background picture or film behind the content under any theme, under a veil of the theme's page so the words stay readable. Under Brand colours it is always drawn. It needs a background switched on in your brand's settings; without one, the theme's plain page is drawn.
metaDatagroupMeta data: Everything about the post that is never drawn in the clip: its title, its description in four lengths, one per kind of platform, and its hashtags. Reelwire adds the brand's description, link and hashtags after it. Left out, the post text is generated from the clip data.
metaData.titletextup to 100 charactersTitle: Used where the platform has a title of its own: Facebook Reels, Pinterest and YouTube. Up to 100 characters, which every one of them takes.
metaData.captionTinytextup to 200 charactersTiny description (Pinterest, Threads, X): Up to 200 characters. The brand's description, link and hashtags follow it within the platform's limit.
metaData.captionShorttextup to 500 charactersShort description (Telegram): Up to 500 characters. The brand's description, link and hashtags follow it within the platform's limit.
metaData.captionMediumtextup to 1500 charactersMedium description (Discord, Facebook Reels, Instagram, LinkedIn, Slack, TikTok): Up to 1500 characters. The brand's description, link and hashtags follow it within the platform's limit.
metaData.captionLongtextup to 4000 charactersLong description (Facebook Feed, YouTube): Up to 4000 characters. The brand's description, link and hashtags follow it within the platform's limit.
metaData.hashtagslistup to 15Hashtags: Written without the #. Up to 15, which every platform takes.
metaData.hashtags[]textup to 60 charactersHashtag

locales carries other languages: under each language code, the parts of clipData and metaData that differ, laid over the default, so a language with no copy still renders.

A picture is always a file from your media library: media:// followed by its id or its name. Anything the table does not list is refused, and so is anything over its limit, with a 400 schema_validation error that names the field.

Ask Reelwire for the whole JSON Schema, the document your content is checked against, without signing in:

curl "https://app.reelwire.io/v1/formats/template/tpl_dfa25e30e29c?variant=Corporate%20glass&version=1.0.0"

Delivery JSON​

Your own system sends this to one of your streams, POST /v1/stream, and every channel listening to that stream draws it with its template. data is the document described above; a stream with an empty field map passes it to the template unchanged. Try it first on POST /v1/stream/validate, which answers the same without publishing anything. Streams and feeds explains the rest, including how to map a document of your own shape instead.

{
"streamId": "st_your_stream_id",
"eventId": "01M2SQMKK3G1NVFXV31DCBVB95",
"occurredAt": "2026-09-23T07:00:00Z",
"locale": "en",
"data": {
"clipData": {
"kicker": "Side by side",
"title": "Fixed or flexible: two electricity tariffs compared for a typical home",
"items": [
{
"name": "Fixed 12",
"picture": {
"alt": "Soft waves of violet and blue, the picture of the fixed tariff",
"url": "media://example-image.jpg"
}
},
{
"name": "Flex",
"picture": {
"alt": "Blue and orange ink swirling in water, the picture of the flexible tariff",
"url": "media://example-image.png"
}
}
],
"pictureFit": "auto",
"pictureFocus": "centre",
"rows": [
{
"unit": "ct/kWh",
"label": "Unit rate",
"better": "low",
"values": [
24.5,
27.9
]
},
{
"label": "Yearly cost",
"better": "low",
"prefix": "€",
"values": [
910,
1006
]
},
{
"unit": "months",
"label": "Price fixed for",
"better": "high",
"values": [
12,
0
]
},
{
"label": "Exit fee",
"better": "low",
"prefix": "€",
"values": [
60,
0
]
},
{
"unit": "%",
"label": "Renewable share",
"better": "high",
"values": [
100,
100
]
}
],
"versus": "VS",
"source": "Source: Tariff sheets for October, a home using 3,100 kWh a year",
"styleWords": {
"live": "LIVE",
"byline": "By",
"functionKeys": [
"HELP",
"DATA",
"CHART",
"NEWS"
],
"commandKey": "GO",
"realTime": "RT",
"messageLabel": "MSG",
"pictureLabel": "IMG"
},
"look": {
"theme": "auto",
"pace": "auto",
"corners": "auto",
"align": "auto",
"logo": "auto",
"logoSize": "auto",
"logoForm": "auto",
"hideHeader": false,
"hideFooter": false,
"pattern": "auto",
"background": false
}
},
"metaData": {
"title": "Fixed 12 or Flex? Two electricity tariffs compared on rates, charges, yearly cost and exit fees",
"captionTiny": "Fixed 12 or Flex? Fixed has the lower unit rate and costs €910 a year against €1,006 for a typical home. Flex has no exit fee and a lower standing charge. Both are 100% renewable.",
"captionShort": "Fixed 12 or Flex? For a home using 3,100 kWh a year, Fixed 12 costs about €910 and Flex about €1,006. Fixed 12 has the lower unit rate, 24.5 cents a kWh against 27.9, and holds its price for 12 months, but leaving early costs €60. Flex has a slightly lower standing charge and you can leave at any time. Both supply 100% renewable electricity. Which suits you depends on whether you value a fixed bill or the freedom to switch.",
"captionMedium": "Fixed 12 or Flex? Two electricity tariffs side by side, worked out for a typical home using 3,100 kWh a year.\n\nFixed 12 has the lower unit rate, 24.5 cents a kWh against 27.9, and holds that price for twelve months. Over a year that comes to about €910, against about €1,006 on Flex. Leaving Fixed 12 before the twelve months are up costs an exit fee of €60.\n\nFlex has a slightly lower standing charge, 38.6 cents a day against 41.2, and no exit fee, so you can switch whenever a better offer comes along. Its price can change with a month's notice.\n\nBoth supply 100% renewable electricity, so neither wins on that.\n\nIf you want a bill you can plan around, Fixed 12 is the cheaper choice for most homes. If you expect to move or switch within the year, Flex keeps you free. Figures are for illustration; your own cost depends on how much you use.",
"captionLong": "Fixed 12 or Flex? Two electricity tariffs side by side, worked out for a typical home using 3,100 kWh a year.\n\nFixed 12 has the lower unit rate, 24.5 cents a kWh against 27.9, and holds that price for twelve months. Over a year that comes to about €910, against about €1,006 on Flex. Leaving Fixed 12 before the twelve months are up costs an exit fee of €60.\n\nFlex has a slightly lower standing charge, 38.6 cents a day against 41.2, and no exit fee, so you can switch whenever a better offer comes along. Its price can change with a month's notice, up or down.\n\nBoth supply 100% renewable electricity, so neither wins on that.\n\nHow the yearly cost is worked out: the unit rate times 3,100 kWh, plus the standing charge for 365 days. A home that uses more electricity gains more from the lower unit rate of Fixed 12; a small flat that uses little gains less, and the standing charge matters more.\n\nIf you want a bill you can plan around, Fixed 12 is the cheaper choice for most homes. If you expect to move or switch within the year, Flex keeps you free. Figures are for illustration; your own cost depends on how much you use. Check your last bill for your yearly use before you choose.",
"hashtags": [
"energy",
"electricity",
"tariffs",
"compared",
"bills",
"household"
]
}
}
}

The delivery names no version: which build draws it is the channel's choice, the newest of its variant or the one it is pinned to. eventId is a ULID you make once per event: sending the same one again changes nothing. occurredAt is when the thing happened, not when you sent it. locale is the language of the text in data, and data.locales carries other languages beside it.

Ready-made feeds drawn with it​

Each of these feeds is drawn with this template, in whichever of its variants a channel chooses when it adds the feed.